home *** CD-ROM | disk | FTP | other *** search
/ Tech Arsenal 1 / Tech Arsenal (Arsenal Computer).ISO / tek-19 / pkey12_1.zip / README.1ST < prev    next >
Text File  |  1992-09-13  |  14KB  |  300 lines

  1. What:               Power key menu system for autocad (version 1.02)
  2.                     This is a bug fix for some major lisp routine failures
  3.                     one reason for not making last minute changes.
  4.                     This is FREEWARE.  No payment required.
  5.  
  6. Author:             Patrick mckee
  7.  
  8. file:               Readme.1st
  9.  
  10. Programs:           Misc. Lisp routines and menu system for autocad r10
  11.  
  12. Limitations:        Not yet tested fully with release 11
  13.  
  14. Known limitations:  some of the menu features in release 11 are lost
  15.                     when one of pkey's menu are loaded, this is due 
  16.                     to the fact that this was created with r10 menus.
  17.  
  18. This is a release to fix some reported bugs with version 1.01.  It
  19. appears that some of the symbols were created with a different menu and
  20. a hand lettering font.  The font was not liscensed for distribution.
  21. I did not include the font and this caused a slew of problems.  I
  22. apologize if this caused any problems.  The font has been redefined
  23. using romans.shx if you don't like this remove that font, call up
  24. the symbol drawing and change the font selection when prompted.
  25. Also, some of the lisp files were buggy and I have tried to fix these
  26. problems in as many as I could.
  27.  
  28. I must ask that if you find a problem with the menu just contact me,
  29. either in writing or via e-mail.  I understand that some problems may
  30. make you angry but please try to be understanding with me.  I am a
  31. student, I work 30 hours a week and this makes complete devotion to
  32. this menu an impossibility.  Although I try to do my best I realize
  33. that you can not please all of the people all of the time. (cliche')
  34.  
  35. I am still trying to update the symbol library but this is perhaps the
  36. the most time-consuming task.  Please be patient.  I am also working
  37. on a mouse menu with all symbol libraries and commands in the pulldowns.
  38. This came about because I now work mainly on my notebook whenever I get
  39. the chance, ie.  the library, the plaza, the union, before class.
  40.  
  41. There is an acad help file added.  This is merely the explaination of the
  42. key macros defined in mustread.me added to a file called acadhlp.txt.
  43. If you want this to show up like the acad help file does in AutoCad (tm)
  44. then rename the old acad.hlp file to acadhlp.sav and rename acadhlp.txt
  45. to acad.hlp.
  46.  
  47. This is a menuing system for autocad.  It has tablet menus and lisp routines
  48. and symbol libraries and all sorts of nifty little key macros that I have
  49. found to be usefull.  Most of the lisp routines are not memory resident
  50. in Autocad, meaning that you do not load them, they are loaded via the
  51. KEY.LSP file macros.  If for some reason you do not want to load KEY.LSP
  52. then the lisp routines must be modified in order to run when loaded.  I
  53. will be adding another set of lisp routines in the future that have al-
  54. ready been modified to be stand alone, but this will be a completely
  55. different zipped file with a different name - not a part of the PKEY
  56. package.
  57.  
  58. After reading this file please read the mustread.me file in the pkey12-1.zip
  59. file.
  60.  
  61. Contained on the diskettes you received should have been the following
  62. files:
  63.  
  64.       pkey12-1.zip   (the lisp routines and utilities and tablet dwg)
  65.       pkey12-2.zip   (the first symbol library)
  66.       pkey12-3.zip   (the second symbol library)
  67.  
  68. If any of these files are missing contact me at (501) 677-2875.  Or
  69. use my internet or bitnet addresses at the end of this file.
  70. State the problem and I will try to remedy the problem. Do not
  71. distribute this software unless the package is complete, and all
  72. the above mentioned files are intact.
  73.  
  74. All that is requested at this time by the author is that all
  75. copies distributed complete with documentation (such as it is)
  76. and that if this product is found to be of use.
  77.  
  78. Optional Reimbursement options (skip this if you want)
  79.  
  80. There is one way in which you can reimburse this author
  81. for use of the kee power menu - however this menu is FREEWARE
  82. and no payment is required.
  83.  
  84.  
  85. 1.   You can submit new symbols and lisp routines for inclusion
  86.      in the next release.  Please make sure that the symbols or
  87.      lisp files are not copyrighted and have not come from any 
  88.      other vendor's product, but are of your own design.
  89.      full credit will be given, but absolutely no monetary
  90.      rewards at all unless future releases are payed for.
  91.      and all of this is at my discretion since this is freeware
  92.      all submitted items become the property of power key and only
  93.      signature credit will be given.  Since I receive no monies
  94.      no one else does either.  I also have a need for custom fonts
  95.      or hatch patterns.
  96.  
  97.                                    
  98.      Patrick J. McKee                                 
  99.      Rt 1, box 5
  100.      Combs, Arkansas
  101.      72721
  102.  
  103. phone:  501-677-2875
  104.  
  105. This author understands that this product is not perfect for all
  106. situations, but is a powerful tool to aid in the editing process.
  107. Updates will continue to be in a timely manner.
  108.  
  109. The lisp routines are un-encrypted to allow further customization,
  110. however, in order to get your modification into future updates
  111. please send a disk with the modified part of code, or routine,
  112. and a review will be made. This is a users menu, and it can grow,
  113. if users support it.
  114.  
  115. *******************************************************************************
  116. STANDARD BLAH DISCLAIMER
  117.  
  118. The author of this program makes no warranties for this product.
  119.  
  120. Blah! Blah! Blah! Blah!
  121.  
  122. Do not use this product in conjunction with other vendors products.
  123. The performance of neither this product nor the other can be predicted
  124. and conflicts could arise.
  125.  
  126. *******************************************************************************
  127.  
  128. Installation
  129.  
  130. Copy the pkey12-1.zip to your acad program directory.  Rename or save your
  131. acad.lsp to save a copy of your old file.  Unzip the pkey12-1.zip file into your
  132. acad directory. Do not overwrite any existing files when prompted, write down
  133. which ones were duplicates of one of your own lisp routines and rename them
  134. temporarily, then re-unzip pkey12-1.zip with the -o switch to overwrite any
  135. existing files. This file contains all the program files and lisp routines
  136. for the menu. Make a directory off of the root directory of either c or d
  137. drive, called 'kesym1', no quotes, copy the files pkey12-2.zip and pkey12-3.zip
  138. into the newly created kesym1 directory, keep in mind that 'kesym1' directory
  139. is the symbol directory for the menu (this means that when you load a
  140. menu either ckee.mnu or dkee.mnu you load the menu with the corresponding
  141. drive name) unzip the files in order, always overwrite any prior file messages
  142. as some symbol updates may have been added at the last minute.
  143.  
  144.  
  145.  
  146. Script files:
  147.  
  148. Some script files have been included:
  149.  
  150. reconfig.scr............................this reconfigures the tablet by
  151.                                         supplying the answers for the
  152.                                         kee menu.
  153.  
  154. newtab.scr..............................configures the tablet the first
  155.                                         time a new tablet is needed.
  156.  
  157. compress.scr............................this script file is used with the
  158.                                         compress lisp routine. Use this
  159.                                         routine with caution some users
  160.                                         have said it bombs when used with
  161.                                         any aec products. Do not use this
  162.                                         menu software with any other menu
  163.                                         template software.
  164.  
  165. get_it.scr..............................this script file is created when
  166.                                         executing the gf(getfile).lsp
  167.  
  168. 1.scr...................................to be used to open a new drawing
  169.                                         i.e. Acad new 1, from the dos
  170.                                         prompt.
  171.  
  172. 2.scr...................................same as above only open an existing
  173.                                         drawing.
  174.  
  175. 3.scr...................................same as above only enters the plot
  176.                                         option and goes to town. Make sure
  177.                                         your parameters are set, cause this
  178.                                         one does not ask questions. Drawing
  179.                                         must be supplied also.
  180.                                         i.e.  Acad dwg-name 3
  181.  
  182. 18.scr..................................used by plot.lsp to plot at 1/8"
  183.                                         scale. Again set your parameters up
  184.                                         first, once the questions in plot.lsp
  185.                                         have been answered, it plots.
  186.                                         this will be updated soon so look
  187.                                         for this to auto set your pens.
  188.  
  189. 14.scr..................................same as 18.scr for 1/4" scale.
  190.  
  191. f and fit.scr...........................same, plot to fit.
  192.  
  193. ****miscellaneous notes****
  194.  
  195. Menu files:
  196.  
  197. Two menu files have been provided one for a c: drive set up ( ckee.mnu )
  198. and a d: drive set up ( dkee.mnu ).  Mouse menu due by December 92.
  199.  
  200. ***********************************************************************
  201. Please note that the door routines are accessed by the tools section of
  202. the pulldown menu!!!!!
  203. ***********************************************************************
  204.  
  205. Misc. Files
  206.  
  207. A file called keeline.lin has been included, this file has some extra fine
  208. line difinitions in it (check it out).
  209.  
  210. ****************************************************************************
  211. CNS.LSP and DNS.LSP are block replacement routines for changing an existing
  212. symbol into one that you are more comfortable with. These were added at the
  213. last and as far as I know they work only to change an existing symbol in the
  214. kesym1 directory. CNS is for a C drive set up and DNS is for a D drive setup.
  215. ****************************************************************************
  216.  
  217. Standard set up:
  218.  
  219.  
  220.   c:\  or  d:\ -----|
  221.             |       |
  222.             |      acad............all .mnu, .lsp, .slb, and .scr
  223.             |        |             files.
  224.             |        |
  225.             |        |---draft.....this is an optional draft
  226.             |                      directory. The logic is that
  227.             |                      if you execute acad from the
  228.             |                      draft\  directory all of the
  229.             |                      current sessions work is in
  230.             |                      this directory making cleanup
  231.             |                      and back ups much easier.
  232.             |                      this directory is strictly
  233.             |                      optional.                    
  234.             |                                                    
  235.             |                                             
  236.             |
  237.             |
  238.             |----Kesym1............this is the symbol directory
  239.  
  240.  
  241. Hint:
  242.       Where ever your acad program files reside so do the power key
  243.       program files ( .scr, .lsp, .slb, .mnu )
  244.  
  245. ******************************************************************************
  246. Tablet drawing
  247.  
  248. The tablet drawing is provided on the diskette or in the zip file pkey12-1
  249. you must plot this out and use this as your overlay for I re-did the whole
  250. deal.  Not to bad and after a while you will like it, I hope!  At least give 
  251. it a try.  And then give me a critique, I am asking for it.  If you don't
  252. like the layout tell me and if enough people bitch i'll change it, maybe.
  253. that is the best I can do.  Since a lot of my time and effort went into this
  254. i am reluctant to change too much.
  255.  
  256. The file is called pwr-tab.dwg.
  257. *******************************************************************************
  258.  
  259. Tablet configuration:
  260.  
  261. To configure the tablet run the reconfig.scr file that came with
  262. your diskettes, it is set to run the configuration automatically.
  263.  
  264. I understand that I changed the layout from the standard menu file,
  265. this action was brought about for two reasons:
  266.  
  267. 1.  In order to facilatate the use of the redefined commands in the
  268.     key.lsp.
  269.  
  270. 2.  Rather than clash with autodesk on the use of the tablet overlay
  271.     I opted to do the whole deal.
  272.  
  273. *******************************************************************************
  274.  
  275.  
  276. Drawing environment set up:
  277.  
  278. To set up your drawing environment use the pop down 'setup' to start
  279. a new drawing answer the prompts and it should do the set up.
  280. If not then do a normal manual tablet config and use the numbers
  281. provided in the screen area on the overlay.
  282.  
  283. The symbol library is currently being updated to add more and to clean
  284. up some symbols, and to add some 3d symbols.  I have tried to put
  285. together a complete package but I know that despite my best
  286. intentions, I am sure there are some things I am not aware of.
  287. I can take it.  Let me have it. If you feel the desire to help
  288. in the creation of a new and inexpensive alternative to the high
  289. priced menu systems currently available, criticism is needed, help
  290. or support is vital.  Any help with lisp routines, and other aspects
  291. of the menu are greatly appreciated.
  292.  
  293.  
  294. Patrick james mckee, author
  295. Rt. 1, Box 5
  296. Combs, Arkansas
  297. 72721
  298.  
  299. pmckee@uafsysb.bitnet
  300. pmckee@uafsysb.uark.edu